Specifications
From The Manufacturer:
AIR-AP1832I-C-K9C Access Point Specifications:
| Category | Details |
|---|---|
| Software | – Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later- Deployment modes: Centralized, standalone, sniffer, Cisco FlexConnect™, monitor, OfficeExtend, mesh – Supported wireless LAN controllers: Various models including Cisco 2500 Series, Cisco 5500 Series, Cisco 8500 Series, etc. – Cisco Mobility Express support |
| 802.11n Version 2.0 Capabilities | – 3×3 MIMO with two spatial streams – Maximal ratio combining (MRC) – 20- and 40-MHz channels – PHY data rates up to 300 Mbps (40 MHz with 5 GHz)- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – Cyclic shift diversity (CSD) support |
| 802.11ac Wave 1 and 2 Capabilities | – 3×3 MIMO with two spatial streams, single-user or multiuser MIMO- MRC – 802.11ac beamforming (transmit beamforming)- 20-, 40-, and 80-MHz channels – PHY data rates up to 867 Mbps (80 MHz in 5 GHz) – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support |
| Hardware | – Integrated antennas: 2.4 GHz (3 dBi gain) and 5 GHz (5 dBi gain), both with a 360° horizontal beamwidth – Interfaces: 1 x 10/100/1000BASE-T autosensing (RJ-45) with PoE support, management console port (RJ-45), USB 2.0 (enabled via future software) – Dimensions: 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) – Weight: 3.12 lb (1.41 kg) |
| Environmental | – Operating temperature: 32° to 104°F (0° to 40°C) – Operating humidity: 10% to 90% (noncondensing) – System memory: 1 GB DRAM, 256 MB flash |
| Power | – Input power requirements: AP1830: 44 to 57 VDC, Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz – Power draw: 15.4W- Powering options: 802.3af/802.3at, Enhanced PoE, Cisco local power supply, Cisco power injector |
| Warranty | – Limited lifetime hardware warranty |
