Specifications
From The Manufacturer:
AIR-AP1852I-C-K9C Access Point Specifications:
Category | Details |
---|---|
Software | – Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points – Deployment modes: Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh – Supported wireless LAN controllers: Various models including Cisco 2500 Series, Cisco 5500 Series, Cisco 8500 Series, etc. – Cisco Mobility Express support |
802.11n Version 2.0 Capabilities | – 4×4 MIMO with four spatial streams – Maximal ratio combining (MRC) – 20- and 40-MHz channels – PHY data rates up to 600 Mbps (40 MHz with 5 GHz) – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – Cyclic shift diversity (CSD) support |
802.11ac Wave 1 and 2 Capabilities | – 4×4 MIMO with four spatial streams, single-user MIMO – 4×4 MIMO with three spatial streams, multiuser MIMO – MRC – 802.11ac beamforming (transmit beamforming) – 20-, 40-, and 80-MHz channels – PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz) – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support – Rogue device detection |
Hardware | – Integrated antennas: 2.4 GHz (3 dBi gain) and 5 GHz (5 dBi gain), both with a 360° horizontal beamwidth – External antenna (sold separately), certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) – Interfaces: 1 x 10/100/1000BASE-T autosensing (RJ-45) with PoE, 1 x 10/100/1000BASE-T autosensing (RJ-45) AUX, management console port (RJ-45), USB 2.0 |
Environmental | – Operating temperature: 32° to 104°F (0° to 40°C)- Operating humidity: 10% to 90% (noncondensing)- System memory: 1 GB DRAM, 256 MB flash |
Power | – Input power requirements: AP1850: 44 to 57 VDC, Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz – Power draw: 20.9W – Powering options: 802.3at, Enhanced PoE, Cisco power injector |
Warranty | – Limited lifetime hardware warranty |