Software |
– Cisco Unified Wireless Network Software Release 8.9 or later |
|
– Cisco IOS XE Software Release 16.11 or later |
Supported wireless LAN controllers |
– Cisco Catalyst 9800 Series Wireless Controllers |
|
– Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
802.11n capabilities |
– 4×4 MIMO with four spatial streams |
|
– Maximal Ratio Combining (MRC) |
|
– 802.11n and 802.11a/g beamforming |
|
– 20- and 40-MHz channels |
|
– PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
|
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
|
– 802.11 Dynamic Frequency Selection (DFS) |
|
– Cyclic Shift Diversity (CSD) support |
802.11ac capabilities |
– 4×4 downlink MU-MIMO with four spatial streams |
|
– MRC |
|
– 802.11ac beamforming |
|
– 20-, 40-, 80-, and 160-MHz channels |
|
– PHY data rates up to 3.47 Gbps (160 MHz with 5GHz) |
|
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
|
– 802.11 DFS |
|
– CSD support |
802.11ax capabilities |
– 4×4 downlink MU-MIMO with four spatial streams |
|
– Uplink/downlink OFDMA |
|
– TWT |
|
– BSS coloring |
|
– MRC |
|
– 802.11ax beamforming |
|
– 20-, 40-, 80-, and 160-MHz channels |
|
– PHY data rates up to 5.38 Gbps (160 MHz with 5GHz and 20 MHz with 2.4 GHz) |
|
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
|
– 802.11 DFS |
|
– CSD support |
Integrated antenna |
– 2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth |
|
– 5 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth |
External antenna |
– Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dB (2.4 GHz and 5 GHz) |
|
– Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios |
Interfaces |
– 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz |
|
– Management console port (RJ-45) |
|
– USB 2.0 (enabled via future software) |
Indicators |
– Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H) |
– Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) |
Input power requirements |
– 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE) |
|
– Cisco power injector, AIR-PWRINJ6= |
|
– 802.3af PoE |
|
– Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
|
|
Environmental |
– See specific temperature and humidity ranges listed for the Cisco Catalyst 9115AXI model |
System memory |
– 2048 MB DRAM |
|
– 1024 MB flash |
Available transmit power settings |
– See detailed power settings for both 2.4 GHz and 5 GHz frequencies |
Frequency band and 20-MHz operating channels |
– G(G regulatory domain): |
|
– 2.412 to 2.472 GHz; 13 channels |
|
– 5.745 to 5.865 GHz; 7 channels |