Specifications
From The Manufacturer:
CPE710 Outdoor CPE Specifications:
Category | Specification |
---|---|
Processor | Qualcomm 750MHz CPU, MIPS 74Kc |
Memory | 128 MB DDR2 RAM, 16 MB Flash |
Interface | – 1 10/100/1000 Mbps Shielded Ethernet Port (LAN/POE) |
– 1 Reset Button | |
Power Supply | Passive Power over Ethernet via LAN (+4,5pins; -7,8pins) |
Voltage range: 16-27V DC | |
Dimensions (W x D x H) | 366 x 280 x 207 mm (14.4 x 11.0 x 8.1 in.) |
Antenna Gain | 23 dBi |
Antenna Beamwidth | 9° (Azimuth)/7° (Elevation) |
Protection | – 15 kV ESD Protection |
– 6 KV Lightning Protection | |
Enclosure | Material: Outdoor PC stabilized plastic |
Weatherproof: IP65 water and dustproof design | |
WIRELESS FEATURES | |
Wireless Standards | IEEE 802.11a/n/ac |
Wireless Speeds | – Up to 867 Mbps (80 MHz, Dynamic) |
– Up to 400 Mbps (40 MHz, Dynamic) | |
– Up to 173.4 Mbps (20 MHz, Dynamic) | |
Frequency | 5.15–5.85 GHz |
Transmit Power | Max. 27 dBm (Adjustable power by 1dBm) |
SOFTWARE FEATURES | |
Network Configuration | – WAN: Static/ Dynamic/ PPPoE |
– LAN: Static/ Dynamic/ DHCP | |
– Forwarding: ALG/ UPnP/ Virtual Server/ Port Trigger | |
– Security: SPI Firewall/ Ping Forbidden/ DoS Protection/ Access Control/ Static Routing/ Bandwidth Control/ IP & MAC Binding | |
Wireless Configurations | – Selectable Channel Width: 20/40/80MHz |
– Auto Channel Selection | |
– Transmit Power Control | |
– Dynamic Frequency Selection(DFS) | |
– WDS Enable/ Disable | |
– Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, SSID Broadcast Enable/ Disable, Multi-SSID with VLAN Tagging(AP Mode only), Distance/ ACK Timeout Setting, Wireless MAC Address Filter | |
– Wireless Advanced: Beacon Interval/ RTS Threshold/ Fragmentation Threshold/ DTIM Interval/ AP Isolation/ Short GI/ Wi-Fi Multimedia/ Long Range PtP | |
Management | – Discovery and Remote Management via Pharos Control application |
– HTTP/ HTTPS Web-based management | |
– System log | |
– SNMP Agent(v2c) | |
– Ping Watch Dog | |
– Dynamic DDNS | |
– SSH Server | |
System Tools | – Indicators: Signal Strength/ Noise/ Transmit CCQ/ CPU/ Memory |
– Monitors: Throughput/ Stations/ Interfaces/ ARP/ Routes/ WAN/ DHCP | |
– Spectrum Analyzer | |
– Speed Test | |
– Ping | |
– Traceroute | |
– Antenna Alignment | |
– System-level Optimizations: Optimized IGMP Snooping / Proxy for multicast applications | |
POE ADAPTER FEATURES | |
Dimensions(W x D x H) | 85.8×43.9×29.7 mm |
Interfaces | – 1 AC Jack with Earth Ground |
– 1× 10/100/1000 Mbps Shielded Ethernet Port (Power + Data) | |
– 1× 10/100/1000 Mbps Shielded Ethernet Port (Data) | |
Button | Remote Reset Button |
Power Status LEDs | Green |
Input | 100-240VAC, 50/60Hz |
Output | 24VDC, 0.6A Max |
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) | |
Efficiency | >84.29% |
Certifications | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
OTHERS | |
Certification | CE, FCC, RoHS, IP65, IC |
Package Contents | – Outdoor Wireless CPE |
– 24V 0.5A Passive PoE Adapter | |
– Pole Mounting Kits | |
– AC Power Cord | |
– Installation Guide | |
System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. |
Note: We recommend you to use one of the following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. | |
Environment | – Operating Temperature: -40℃70℃ (-40℉158℉) |
– Storage Temperature: -40℃70℃ (-40℉158℉) | |
– Operating Humidity: 10%~90% non-condensing | |
– Storage Humidity: 5%~95% non-condensing |
Product Datasheet: