Specifications
From The Manufacturer:
DAP-2680 Access Point Specifications:
| Category | Specification |
|---|---|
| Type | Software Managed AP |
| Wireless standard | Wireless AC Wave 2 |
| Frequency band mode | Dual-band simultaneous |
| Wireless speed | 450 Mbps at 2.4 GHz, 1300 Mbps at 5 GHz |
| Antenna type | Embedded omnidirectional antennas |
| Antenna gain | 3.6 dBi for 2.4 GHz, 4.2 dBi for 5 GHz |
| Power-over-Ethernet | Yes |
| Wired interface | 1 x Gigabit Ethernet LAN |
| Indoor/outdoor | Indoor |
| Type of housing | Plastic |
| Wireless modes | Access Point (AP), WDS bridge, WDS with AP, Wireless client |
| Advanced features | 802.11k/r Roaming, MU-MIMO, SmartBeam |
| Maximum number of SSIDs | 16 |
| Auto channel selection | Yes |
| WMM-PS/802.11e (U-APSD) | Yes |
| Wi-Fi scheduler | Yes |
| AP traffic load balance | Yes |
| L2 roaming | Yes |
| WEP 64/128 bit | Yes |
| WPA/WPA2-Personal/Enterprise | Yes |
| TKIP/AES encryption | Yes |
| WPA_WPA2_PSK over WDS | Yes |
| WLAN partition | Yes |
| SSID broadcast disable | Yes |
| Rogue AP detection | Yes |
| Station isolation | Yes |
| MAC address filtering | Yes |
| 802.1X authentication | Yes |
| DHCP server | Yes |
| IGMP snooping | Yes |
| ARP spoofing | Yes |
| NTP | Yes |
| IPv6 | Yes |
| Management platform | Nuclias Connect |
| WEB | Yes |
| SNMP (v1, v2c, v3) | Yes |
| CLI | Yes |
| Telnet | Yes |
| SSH | Yes |
| Syslog | Yes |
Product Datasheet:
