| Processor |
Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc |
| Memory |
64MB DDR2 RAM, 8MB Flash |
| Interface |
– 1 10/100Mbps Shielded Ethernet Port (Passive PoE in) |
|
– 1 Grounding Terminal |
|
– 1 Reset Button |
| Power Supply |
Passive Power over Ethernet via LAN0 (+4,5 pins; -7,8 pins) |
|
Voltage range: 16-27VDC |
| Power Consumption |
10.5 Watts Max |
|
Note: Power drawn from the power source will be higher when deployed using Passive PoE |
| Dimensions |
8.8 x 3.1 x 2.4 in |
| Antenna Type |
Built-in 13dBi 2 x 2 Dual-polarized Directional Antenna |
|
Beam Width: 45° (H-Plane) / 30° (E-Plane) |
| Protection |
– 15KV ESD Protection |
|
– 6KV Lightning Protection |
| Enclosure |
Outdoor ASA-stabilized plastic material |
|
IPX5 waterproof Certification |
| Wireless Features |
Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled) |
|
Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled) |
|
Wireless Speeds: Up to 300Mbps (40MHz,Dynamic) |
|
Up to 144.4Mbps (20MHz,Dynamic) |
|
Up to 72.2Mbps (10MHz,Dynamic) |
|
Up to 36.1Mbps (5MHz,Dynamic) |
|
Frequency: 5.15~5.85GHz |
|
Transmission Power: 23dBm/200mw (Adjustable power by 1dBm) |
|
Note: Maximum transmission power may vary depending on the channel |
| Software Features |
– Wireless Configurations: Pharos MAXtream TDMA Technology |
|
802.11a/n Modes |
|
Selectable Channel Width: 5/10/20/40MHz |
|
Automatic Channel Selection |
|
Transmission Power Control |
|
Dynamic Frequency Selection (DFS) |
|
WDS Enable/Disable |
|
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption |
|
64/128/152-bit WEP Encryption |
|
SSID Broadcast Enable/Disable |
|
Multi-SSID with VLAN Tagging (AP mode only) |
|
Distance/ACK Timeout Setting |
|
Wireless MAC Address Filter |
|
– Wireless Advanced: |
|
Beacon Interval/RTS Threshold/Fragmentation |
|
Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
|
– Management: Discovery and Remote Management via Pharos Control application |
|
HTTP/HTTPS Web-based management |
|
System Log |
|
SNMP Agent(v2c) |
|
Ping Watch Dog |
|
Dynamic DNS |
|
SSH Server |
|
– System Tools: Wireless Signal Quality Indicators |
|
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP |
|
Spectrum Analyzer |
|
Speed Test |
|
Ping |
|
Traceroute |
|
– System-level Optimizations: Optimized IGMP Snooping/Proxy for multicast applications |
|
Hardware watchdog |
| POE Adapter Features |
Dimensions: 4.3 x 2.2 x 1.3 in |
|
Interfaces: – 1 AC Jack with Earth Ground |
|
– 1 10/100Mbps Shielded Ethernet Port (Power + Data) |
|
– 1 10/100Mbps Shielded Ethernet Port (Data) |
|
Button: Remote Reset Button |
|
Power Status LEDs: Green |
|
Input: 100-240VAC, 50/60Hz |
|
Output: 24VDC, 1A Max |
|
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) |
|
Efficiency: >80% |
|
Certifications: CE/FCC |
| Others |
Certification: FCC, RoHS, IPX5 |
|
Package Contents: Outdoor Wireless CPE |
|
24V 1A Passive PoE Adapter |
|
Pole Mounting Straps |
|
AC Power Cord |
|
Installation Guide |
|
System Requirements: Google Chrome, Safari, and Firefox browsers for web GUI management |
|
Environment: Operating Temperature: -30°C70°C (-22℉158℉) |
|
Storage Temperature: -40℃70℃ (-40℉158℉) |
|
Operating Humidity: 10%~90% non-condensing |
|
Storage Humidity: 5%~95% non-condensing |
