Specifications
From The Manufacturer:
Cisco WS-C2960+48PST-L Switch Specifications:
Model | WS-C2960+48PST-L |
10/100/1000 Ethernet ports | 48 |
Uplink interfaces | 2 SFP and 2 1000BASE-T |
Cisco IOS Software Feature Set | LAN Base |
Available PoE Power | 370W |
Maximum Number of PoE (IEEE 802.3af) Ports* | 24 ports up to 15.4W |
Flash memory | 64 MB |
DRAM | 128 MB |
Forwarding bandwidth | 16 Gbps |
Maximum active VLANs | 255 |
VLAN IDs available | 4K |
Maximum transmission unit (MTU) – L3 packet | 9000 bytes |
Jumbo frame – Ethernet frame | 9018 bytes |
Forwarding Rate: 64-byte L3 Packets, Millions of packets per second | 13.1 |
Dimensions (H x W x D) | 1.73 x 17.70 x 13.07 in (4.4 x 45.0 x 33.2 cm) |
Weight | 5.4 Kg |
Operating temperature up to 5000 ft (1500 m) | 23º to 113ºF
(-5º to 45ºC) |
Operating temperature up to 10,000 ft (3000 m) | 23º to 104ºF
(-5º to 40ºC) |
Short-term exception at sea level* | 23º to 131ºF
(-5º to 55ºC) |
Short-term exception up to 5000 feet (1500 m)* | 23º to 122ºF
(-5º to 50ºC) |
Short-term exception up to 10,000 feet (3000 m)* | 23º to 113ºF
(-5º to 45ºC) |
Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF
(-5º to 40ºC) |
Storage temperature up to 15,000 feet (4573 m) | 23º to 158ºF
(-25º to 70ºC) |
Operating relative humidity | 10% to 95% non-condensing |
Storage relative humidity | 10% to 95% non-condensing |
MTBF in thousands of hours** | 312 |
Ethernet Interfaces | 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
Power | The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC.
Use the supplied AC power cord to connect the AC power connector to an AC power outlet. The Cisco RPS connector offers a connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch. Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle. |
Management | ● BRIDGE-MIB
● CISCO-CABLE-DIAG-MIB ● CISCO-CDP-MIB ● CISCO-CLUSTER-MIB ● CISCO-CONFIG-COPY-MIB ● CISCO-CONFIG-MAN-MIB ● CISCO-DHCP-SNOOPING-MIB ● CISCO-ENTITY-VENDORTYPE-OID-MIB ● CISCO-ENVMON-MIB ● CISCO-ERR-DISABLE-MIB ● CISCO-FLASH-MIB ● CISCO-FTP-CLIENT-MIB ● CISCO-IGMP-FILTER-MIB ● CISCO-IMAGE-MIB ● CISCO-IP-STAT-MIB ● CISCO-LAG-MIB ● CISCO-MAC-NOTIFICATION-MIB ● CISCO-MEMORY-POOL-MIB ● CISCO-PAGP-MIB ● CISCO-PING-MIB ● CISCO-POE-EXTENSIONS-MIB ● CISCO-PORT-QOS-MIB ● CISCO-PORT-SECURITY-MIB ● CISCO-PORT-STORM-CONTROL-MIB ● CISCO-PRODUCTS-MIB ● CISCO-PROCESS-MIB ● CISCO-RTTMON-MIB ● CISCO-SMI-MIB ● CISCO-STP-EXTENSIONS-MIB ● CISCO-SYSLOG-MIB ● CISCO-TC-MIB ● CICSO-TCP-MIB ● CISCO-UDLDP-MIB ● CISCO-VLAN-IFTABLE ● RELATIONSHIP-MIB ● CISCO-VLAN-MEMBERSHIP-MIB ● CISCO-VTP-MIB ● ENTITY-MIB ● ETHERLIKE-MIB ● IEEE8021-PAE-MIB ● IEEE8023-LAG-MIB ● IF-MIB ● INET-ADDRESS-MIB ● OLD-CISCO-CHASSIS-MIB ● OLD-CISCO-FLASH-MIB ● OLD-CISCO-INTERFACES-MIB ● OLD-CISCO-IP-MIB ● OLD-CISCO-SYS-MIB ● OLD-CISCO-TCP-MIB ● OLD-CISCO-TS-MIB ● RFC1213-MIB ● RMON-MIB ● RMON2-MIB ● SNMP-FRAMEWORK-MIB ● SNMP-MPD-MIB ● SNMP-NOTIFICATION-MIB ● SNMP-TARGET-MIB ● SNMPv2-MIB ● TCP-MIB ● UDP-MIB ● ePM MIB |
Standards | ● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization ● IEEE 802.1Q VLAN ● IEEE 802.1s ● IEEE 802.1w ● IEEE 802.1X ● IEEE 802.1ab (LLDP) ● IEEE 802.3ad ● IEEE 802.3af ● IEEE 802.3ah (100BASE-X single/multimode fiber only) ● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports ● IEEE 802.3 10BASE-T ● IEEE 802.3u 100BASE-TX ● IEEE 802.3ab 1000BASE-T ● IEEE 802.3z 1000BASE-X ● RMON I and II standards ● SNMP v1, v2c, and v3 |
Input Voltage and Current | 100 to 240 VAC |
Current (Amperes) | 4.0 – 2.0 |