| Authentication and security |
– Wi-Fi Protected Access 2 (WPA2) – WPA3 is coming in a post–Frame Check Sequence (FCS) release – 802.1X, RADIUS Authentication, Authorization, and Accounting (AAA) – Segmentation via VLANs (up to 16) – 802.11r and 802.11i – Guest network can also authenticate against: Google and Facebook |
| Maximum clients |
Maximum number of associated wireless clients: 200 per Wi-Fi radio, for a total of 400 clients per access point, or 1000 in a system |
| Maximum # of Access Points |
50 Recommended up to 25 |
| Max # of Mesh Extenders |
Maximum number of associated Cisco Business mesh extenders: 25 per Access Point, up to 8 hops |
| 802.11ac |
– 2×2 single-user/multi-user MIMO with two spatial streams, up to 867 Mbps in 5GHz – 20-, 40-, and 80-MHz channels – Dynamic Frequency Selection (DFS) |
| Ethernet ports |
– Authentication with 802.1X or MAC filtered – Dynamic VLAN or per port – Traffic locally switched or tunneled back to Master AP |
| Data rates supported |
– 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps – 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps – 802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40) – 802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9) |
| Maximum number of non-overlapping channels |
Refer to the specific regulatory domains for channel details |
| Available transmit power settings |
– 2.4 GHz: Up to 20 dBm – 5 GHz: Up to 20 dBm Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. |
| Integrated antennas |
– 2.4 GHz, gain 2 dBi – 5 GHz, gain 4 dBi |
| Interface |
– 1x Gigabit Ethernet (10/100/1000BASE-T autosensing), Power over Ethernet (PoE) – RJ-45 console port (not functional) |
| Indicators |
– Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
| Dimensions (W x L x H) |
Access point (without mounting bracket): 6 x 6 x 1.3 in. (150.8 x 150.8 x 33 mm) |
| Weight |
Access point without mounting bracket or any other accessories: 14 oz (400 g) |
| Environmental |
– Operating: Temperature: 32° to 104°F (0° to 50°C), Humidity: 10% to 90% (noncondensing), Maximum altitude: 9843 ft (3000 m) at 40°C – Nonoperating (storage and transportation): Temperature: –22° to 158°F (-30° to 70°C), Humidity: 10% to 90% (noncondensing), Maximum altitude: 15,000 ft (4500 m) at 25°C |
| System |
– 1 GB DRAM, 256 MB flash – 710-MHz quad-core processor |
| Powering options |
– 802.3af/at Ethernet switch; a Cisco Business switch with PoE is recommended – Optional Cisco Business PoE injector |
| Power draw |
8.3W (maximum, on PoE) |
| Mounting and physical security |
Included with the access point: – Mounting bracket – Torx security screw – Ceiling rail mount clip |
| Compliance |
Refer to the specific regulatory standards and certifications listed |
