| Processor |
Qualcomm 560MHz CPU, MIPS 74Kc |
| Memory |
64MB DDR2 RAM, 8MB Flash |
| Interface |
– 1 10/100Mbps Shielded Ethernet Port (LAN/POE) |
|
– 1 Reset Button |
| Power Supply |
Passive Power over Ethernet via LAN (+4,5pins; -7,8pins) |
|
Voltage range: 16-27VDC |
| Power Consumption |
7.41 W |
| Dimensions (W x D x H) |
366 x 280 x 207 mm (14.4 x 11.0 x 8.1 in.) |
| Antenna Gain |
23dBi |
| Antenna Beamwidth |
9° (Azimuth), 7° (Elevation) |
| Protection |
– 15KV ESD Protection |
|
– 6KV Lightning Protection |
| Enclosure |
Material: Outdoor PC stabilized plastic |
|
Weatherproof: IP65 water and dustproof design |
| WIRELESS FEATURES |
|
| Wireless Standards |
IEEE 802.11a/n |
| Proprietary Protocol |
TDMA Mode (with Pharos MAXtream enabled) |
| Wireless Speeds |
– Up to 300Mbps (40MHz, Dynamic) |
|
– Up to 144.4Mbps (20MHz, Dynamic) |
|
– Up to 72.2Mbps (10MHz, Dynamic) |
|
– Up to 36.1Mbps (5MHz, Dynamic) |
| Frequency |
5.15~5.85GHz |
| Transmit Power |
Max. 25dBm (Adjustable power by 1dBm) |
| SOFTWARE FEATURES |
|
| Network Configuration |
– WAN: Static/Dynamic/PPPoE/L2TP/PPTP |
|
– LAN: Static/Dynamic/DHCP |
|
– Forwarding: ALG/UPnP/Virtual Server/Port Trigger |
|
– Security: SPI Firewall/Ping Forbidden/DoS Protection/Access Control/Static Routing/Bandwidth Control/IP & MAC Binding |
| Wireless Configurations |
– Pharos MAXtream TDMA Technology |
|
– Selectable Channel Width: 5/10/20/40MHz |
|
– Auto Channel Selection |
|
– Transmit Power Control |
|
– Dynamic Frequency Selection(DFS) |
|
– WDS Enable/Disable |
|
– Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption |
|
– SSID Broadcast Enable/Disable |
|
– Multi-SSID with VLAN Tagging(AP Mode only) |
|
– Distance/ACK Timeout Setting |
|
– Wireless MAC Address Filter |
|
– Wireless Advanced: Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| Management |
– Discovery and Remote Management via Pharos Control application |
|
– HTTP/HTTPS Web-based management |
|
– System log |
|
– SNMP Agent(v2c) |
|
– Ping Watch Dog |
|
– Dynamic DDNS |
|
– SSH Server |
| System Tools |
– Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory |
|
– Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP |
|
– Spectrum Analyzer |
|
– Speed Test |
|
– Ping |
|
– Traceroute |
|
– System-level Optimizations: Optimized IGMP Snooping/Proxy for multicast applications/Hardware watchdog |
| POE ADAPTER FEATURES |
|
| Dimensions (W x D x H) |
85.8×43.9×29.7 mm |
| Interfaces |
– 1 AC Jack with Earth Ground |
|
– 1 10/100Mbps Shielded Ethernet Port (Power + Data) |
|
– 1 10/100Mbps Shielded Ethernet Port (Data) |
| Button |
Remote Reset Button |
| Power Status LEDs |
Green |
| Input |
100-240VAC, 50/60Hz |
| Output |
24VDC, 0.5A Max |
|
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) |
| Efficiency |
>84.29% |
| Certifications |
CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| OTHERS |
|
| Certification |
CE, FCC, IC, RoHS, IP65 |
| Package Contents |
– Outdoor Wireless CPE |
|
– 24V 0.5A Passive PoE Adapter |
|
– Pole Mounting Straps |
|
– AC Power Cord |
|
– Installation Guide |
| System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. |
|
Note: We recommend you to use one of the following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. |
| Environment |
– Operating Temperature: -40℃70℃ (-40℉158℉) |
|
– Storage Temperature: -40℃70℃ (-40℉158℉) |
|
– Operating Humidity: 10%~90% non-condensing |
|
– Storage Humidity: 5%~95% non-condensing |
