Specifications
From The Manufacturer
TP-Link TL-SL2428P Gigabit Smart Switch Specifications:
| HARDWARE FEATURES | |
| Standards and Protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at |
| Interface | 24 10/100Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX)
2 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) 2 Combo Gigabit Uplink RJ45/SFP Ports |
| Network Media | 10BASE-T: UTP category 3, 4, 5 cables (maximum 100m)
100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) 1000BASE-X: MMF, SMF |
| Fan Quantity | 2 |
| Physical Security Lock | Yes |
| PoE Budget | 250 W |
| Dimensions (W x D x H) | 17.3 x 7.1 x 1.7 in. (440 x 180 x 44 mm) |
| Mounting | Rack Mountable |
| Max Power Consumption | 18.8 W (220 V / 50 Hz with no PD connected)
286.7 W (220 V / 50 Hz with 250 W PD connected) |
| Max Heat Dissipation | 64.1 BTU/h (with no PD connected)
977.6 BTU/h (220 V / 50 Hz with 250 W PD connected) |
| PERFORMANCE | |
| Switching Capacity | 12.8 Gbps |
| Packet Forwarding Rate | 9.5 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 9216 Bytes |
| SOFTWARE FEATURES | |
| Quality of Service | • 802.1p CoS/ DSCP priority
• 8 priority queues • Priority Schedule Mode – SP (Strict Priority) – WRR (Weighted Round Robin) • Queue Weight Config • Bandwidth Control – Port/Flow-based Rating Limit • Smoother Performance • Actions for flows – Mirror(to supported interface) – Redirect(to supported interface) – Rate Limit – QoS Remark • Storm Control – Multiple Control Modes(kbps/ratio/pps) – Broadcast/Multicast/Unknown-Unicast Control |
| L2 Features | • Link Aggregation – Static link aggregation – Up to 8 aggregation groups and up to 8 ports per group – 802.3ad LACP
• Spanning Tree Protocol – 802.1D STP – 802.1w RSTP – 802.1s MSTP – STP Security: Loopback detection, TC Protect, BPDU Filter/Protect, Root Protect • Loopback Detection – Port-based – VLAN-based • Flow Control – 802.3x Flow Control – HOL Blocking Prevention • Mirroring – Port Mirroring – One-to-One – Many-to-One – Tx/Rx/Both – CPU Mirroring |
| L2 Multicast | • Supports 511 (IPv4, IPv6) IGMP groups
• IGMP Snooping – IGMP v1/v2/v3 Snooping – Fast Leave – IGMP Snooping Querier – IGMP Authentication • IGMP Authentication • MVR • MLD Snooping – MLD v1/v2 Snooping – Fast Leave – MLD Snooping Querier – Static Group Config – Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile |
| IPv6 Support | |
| Dual IPv4/IPv6 | Yes |
| Multicast Listener Discovery (MLD) Snooping | Yes |
| IPv6 neighbor discovery (ND) | Yes |
| Path maximum transmission unit (MTU) discovery | Yes |
| Internet Control Message Protocol (ICMP) version 6 | Yes |
| TCPv6/UDPv6 | Yes |
| IPv6 applications | DHCPv6 Client, Ping6, Tracert6, Telnet (v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP |
| VLAN | |
| VLAN Group | Max 4K VLAN Groups |
| 802.1Q Tagged VLAN | Yes |
| MAC VLAN | 12 Entries |
| Protocol VLAN | Protocol Template 16, Protocol VLAN 16 |
| Private VLAN | Yes |
| GVRP | Yes |
| VLAN VPN (QinQ) | Port-Based QinQ, Selective QinQ |
| Voice VLAN | Yes |
| Access Control List | |
| Time-based ACL | Yes |
| MAC ACL | Source MAC, Destination MAC, VLAN ID, User Priority, Ether Type |
| IP ACL | Source IP, Destination IP, Fragment, IP Protocol, TCP Flag, TCP/UDP Port, DSCP/IP TOS, User Priority |
| Combined ACL | Yes |
| Packet Content ACL | Yes |
| IPv6 ACL | Yes |
| Policy | Mirroring, Redirect, Rate Limit, QoS Remark |
| Security | |
| IP-MAC-Port Binding | Yes |
| DoS Defend | Yes |
| Static/Dynamic Port Security | Up to 64 MAC addresses per port |
| Storm Control | kbps/ratio/pps control mode |
| 802.1X | Port based authentication, Mac based authentication, VLAN Assignment, MAB, Guest VLAN, Support Radius authentication and accountability |
| AAA | Yes, including TACACS+ |
| Port Isolation | Yes |
| Secure web management | Yes, through HTTPS with SSLv3/TLS 1.2 |
| Secure Command Line Interface (CLI) management | Yes, with SSHv1/SSHv2 |
| L3 Features | |
| IPv4/IPv6 Interfaces | 16 |
| Static Routing | 48 static routes |
| Static ARP | 128 static entries |
| ARP Entries | 316 |
| DHCP Server | Yes |
| DHCP Relay | Yes, including DHCP interface relay and DHCP VLAN relay |
| Management | |
| Web-based GUI | Yes |
| Command Line Interface (CLI) | Yes, through console port and telnet |
| SNMP | SNMPv1/v2c/v3, Trap/Inform, RMON (1, 2, 3, 9 groups) |
| SDM Template | Yes |
| DHCP/BOOTP Client | Yes |
| LLDP/LLDP-MED | Yes, 802.1ab |
| DHCP AutoInstall | Yes |
| Dual Image, Dual Configuration | Yes |
| CPU Monitoring | Yes |
| Cable Diagnostics | Yes |
| EEE | Yes |
| Password Recovery | Yes |
| SNTP | Yes |
| System Log | Yes |
| Advanced Features | |
| Automatic Device Discovery | Yes |
| Batch Configuration | Yes |
| Batch Firmware Upgrading | Yes |
| Intelligent Network Monitoring | Yes |
| Abnormal Event Warnings | Yes |
| Unified Configuration | Yes |
| Reboot Schedule | Yes |
| MIBs | |
| MIB II (RFC1213) | Yes |
| Interface MIB (RFC2233) | Yes |
| Ethernet Interface MIB (RFC1643) | Yes |
| Bridge MIB (RFC1493) | Yes |
| P/Q-Bridge MIB (RFC2674) | Yes |
| RMON MIB (RFC2819) | Yes |
| RMON2 MIB (RFC2021) | Yes |
| Radius Accounting Client MIB (RFC2620) | Yes |
| Radius Authentication Client MIB (RFC2618) | Yes |
| Remote Ping, Traceroute MIB (RFC2925) | Yes |
| Support TP-Link private MIBs | Yes |
| MANAGEMENT | |
| Omada App | Yes, requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller |
| Centralized Management | Omada Cloud-Based Controller, Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller |
| Cloud Access | Yes, requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller |
| Zero-Touch Provisioning | Yes, requiring the use of Omada Cloud-Based Controller |
| Management Features | Web-based GUI, Command Line Interface (CLI) through telnet, SNMPv1/v2c/v3, SNMP Trap/Inform, RMON (1,2,3,9 groups), SDM Template, DHCP/BOOTP Client, Dual Image, Dual Configuration, CPU Monitoring, Cable Diagnostics, EEE, SNTP, System Log |
| OTHERS | |
| Certification | CE, FCC, RoHS |
| Package Contents | TL-SL2428P, Power Cord, Installation Guide, Rackmount Kit, Rubber Feet |
| System Requirements | Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8, MAC® OS, NetWare®, UNIX® or Linux |
| Environment | Operating Temperature: 0℃~50℃ (32℉~122℉);
Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
