| Specifications |
Description |
| Standards |
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X, 802.1Q, 802.1D, 802.11i, 802.11e, IPv4, IPv6 |
| Ports |
LAN Gigabit Ethernet auto-sensing |
| Cabling type |
Category 5e or better |
| Antennas |
Internal antennas optimized for installation on a wall |
| LED indicators |
1 multifunction LED |
| Operating system |
Linux |
| Physical Interfaces |
Ports: 10/100/1000 Ethernet with support for 802.3af/at PoE, power port for AC adapter (included) |
|
Buttons: Reset button, power on/off push button |
|
Lock slot: Kensington lock slot |
|
LEDs: 1 LED |
| Physical Specifications |
Dimensions: 5.31 x 5.31 x 1.5 in. (135 x 135 x 38 mm) |
|
Weight: 0.77lb or 350g |
| Network Capabilities |
VLAN support: Yes |
|
Number of VLANs: 1 management VLAN plus 8 VLANs for SSIDs |
|
802.1X supplicant: Yes |
|
SSID-to-VLAN mapping: Yes |
|
Auto-channel selection: Yes |
|
Spanning tree: Yes |
|
Load balancing: Yes |
|
IPv6: Yes |
| Security |
WPA, WPA2 |
|
Access control: Yes |
|
Secure management: HTTPS |
|
SSID broadcast: Yes |
|
Rogue access point detection: Yes |
| Mounting and Physical Security |
Multiple mounting options: Desktop or Wall |
|
Physical security lock: Kensington lock slot |
| Quality of Service |
QoS: Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS |
| Performance |
Wireless throughput: Up to 1.2 Gbps data rate (real-world throughput will vary) |
|
Recommended user support: Up to 64 connective users, 10 active users per radio |
| Multiple-Access Point Management |
Single Point Setup: Yes |
|
Number of access points per cluster: 4 |
|
Active clients per cluster: 120 |
| Configuration |
Web user interface: Built-in web user interface for easy browser-based configuration (HTTP, HTTPS) |
|
Management protocols: Web browser, SNMP v3, Bonjour |
|
Remote management: Yes |
|
Event logging: Local, remote syslog, email alerts |
|
Network diagnostics: Logging and packet capture |
|
Web firmware upgrade: Firmware upgradable through web browser, imported or exported configuration file |
|
DHCP: DHCP client, IPv6 host |
|
HTTP redirect: Yes |
| Wireless |
Frequency: Dual concurrent radios (2.4 and 5 GHz) |
|
Radio and modulation type: Dual radio, Orthogonal Frequency Division Multiplexing (OFDM) |
|
WLAN: 802.11n/ac |
|
Wireless isolation: Wireless isolation between clients |
|
Multiple SSIDs: 8 |
|
Operating Modes: Access point mode, WDS Bridging, Workgroup Bridge mode |
| Environmental |
Operating temperature: 0° to 40°C (32° to 104°F) |
|
Storage temperature: -20° to 70°C (-4° to 158°F) |
|
Operating humidity: 10% to 85% non-condensing |
|
Storage humidity: 5% to 90% non-condensing |
| System memory |
256 MB RAM |
|
128 MB flash |
| Package Contents |
WAP150 Wireless-AC/N Dual Radio Access Point |
|
Power adapter 12V1.5A |
|
Quick-start guide |
|
Ethernet network cable |
| Minimum Requirements |
Switch or router with PoE support, PoE injector, or AC power adapter |
|
Web-based configuration: Java-enabled web browser |
| Warranty |
Access point: Limited lifetime |
