Specifications
From The Manufacturer:
Cisco WS-C2960X-48LPD-L Switch Specifications:
| Model | WS-C2960X-48LPD-L |
| Capacity in Mpps (64-byte packets) | 240.0 |
| Unit Dimensions | 1.75 x 14.5 x 17.5 inch
4.5 x 36.8 x 44.5 cm |
| Unit Weight | 5.8 kg |
| MTBF in hours | 277,960 |
| Maximum number of PoE+ (IEEE 802.3at) ports* | 12 ports up to 30W |
| Maximum number of PoE (IEEE 802.3af) ports* | 24 ports up to 15.4W |
| Available PoE Power (single PS source) | 370W |
| 10/100/1000 Ethernet ports | 48 |
| Uplink interfaces | 4 SFP |
| Cisco IOS Software image | LAN Base |
| Available PoE power | 370W |
| FlexStack-Plus and FlexStack-Extended Capability | Y |
| 2960-X LAN Base | Yes |
| Stack bandwidth | 80 Gbps |
| Stack limit | 8 |
| Cisco IOS feature set | LAN Base |
| FlexStack-Extended scalability and performance | |
| Stack bandwidth | 40 Gbps |
| Stack limit | LAN Base |
| Unicast MAC addresses | 16,000 |
| ARP Entries | 8000 |
| IPv4 unicast direct routes | 2000 |
| IPv4 unicast indirect routes | 1000 |
| IPv6 unicast direct routes | 2000 |
| IPv6 unicast indirect routes | 1000 |
| IPv4 multicast routes and IGMP groups | 1000 |
| IPv6 multicast groups | 1000 |
| IPv4 QoS ACEs | 500 |
| IPv6 QoS ACEs | 500 |
| IPv4 security ACEs | 600 |
| IPv6 Security ACEs | 600 |
| Flash memory | 128 MB for LAN Base and IP Lite SKUs, 64 MB for LAN Lite SKUs |
| DRAM | 512 MB for LAN Base and 256 MB for LAN Lite |
| CPU | APM86392 600 MHz dual-core |
| Console ports | USB (Type B), Ethernet (RJ-45) |
| Storage interface | USB (Type A) for external flash storage |
| Network management interface | 10/100 Mbps Ethernet (RJ-45) |
| Forwarding bandwidth | 108 Gbps |
| Switching bandwidth | 216 Gbps |
| Maximum active VLANs | 1023 |
| VLAN IDs available | 4096 |
| Maximum Transmission Unit (MTU)-L3 packet | 9198 bytes |
| Jumbo frame – Ethernet frame | 9216 bytes |
| Forwarding rate: 64-byte Layer 3 packets | 130.9 Mpps |
| Input voltage and current | 5A to 2A |
| Power rating (switch maximum consumption values) | 0.49 kVA |
| Measured power consumption in watts | |
| 0% traffic | 41.4 |
| 10% traffic | 49.0 |
| 100% traffic | 49.2 |
| Standards | ● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization ● IEEE 802.1Q VLAN ● IEEE 802.1s ● IEEE 802.1w ● IEEE 802.1X ● IEEE 802.1ab (LLDP) ● IEEE 802.3ad ● IEEE 802.3af and IEEE 802.3at ● IEEE 802.3ah (100BASE-X single/multimode fiber only) ● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports ● IEEE 802.3 10BASE-T ● IEEE 802.3u 100BASE-TX ● IEEE 802.3ab 1000BASE-T ● IEEE 802.3z 1000BASE-X ● RMON I and II standards ● SNMP v1, v2c, and v3 ● IEEE 802.3az ● IEEE 802.3ae 10 Gigabit Ethernet ● IEEE 802.1ax |
