| Specifications |
Description |
| Standards |
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (Security Authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) |
| Cabling type |
Category 5e or better |
| Antennas |
Internal antennas optimized for installation on desktop |
| Led indicators |
1 multifunction LED |
| Operating system |
Linux |
| Physical Interfaces |
Ports: 10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included) |
| Power supply |
External 12V/1A DC power jack (Energy Star 2.0 compliant with Efficiency Level 6) and 802.3af/at PoE |
| Buttons |
Reset button, power on/off push button |
| Lock slot |
Slot for Kensington lock |
| LEDs |
1 LED |
| Physical Specifications |
Physical dimensions (W x D x H): 4.85 x 4.85 x 1.25 in. (123 x 123 x 31 mm) |
| Weight |
0.67 lb (303 g) |
| Network Capabilities |
VLAN support: Yes |
| Number of VLANs |
1 management VLAN plus 8 VLANs for SSIDs |
| 802.1X supplicant |
Yes |
| SSID-to-VLAN mapping |
Yes |
| Auto-channel selection |
Yes |
| Spanning tree |
Yes |
| Load balancing |
Yes |
| IPv6 |
Yes |
| Layer 2 |
802.1Q-based VLANs, 8 active VLANs plus 1 management VLAN |
| Security |
WPA/WPA2: Yes, including enterprise authentication |
| Access control |
Yes, management Access Control List (ACL) plus MAC ACL |
| Secure management |
HTTPS |
| SSID broadcast |
Yes |
| Rogue access point detection |
Yes |
| Mounting and Physical Security |
Mounting options: Desktop |
| Physical security lock |
Kensington lock slot |
| Quality of Service |
QoS: Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS |
| Performance |
Wireless throughput: Up to 867-Mbps data rate (real-world throughput will vary) |
| Recommended user support |
Up to 64 connective users, 10 active users |
| Configuration |
Web user interface: Built-in web user interface for easy browser-based configuration (HTTP, HTTPS) |
| Management |
Management protocols: Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour |
| Remote management |
Yes |
| Event logging |
Local, remote syslog, email alerts |
| Network diagnostics |
Logging and packet capture |
| Web firmware upgrade |
Firmware upgradable through web browser, imported or exported configuration file |
| Dynamic Host Configuration Protocol (DHCP) |
DHCP client |
| IPv6 host |
Yes |
| HTTP redirect |
Yes |
| Wireless |
Frequency: Dual bands (2.4 and 5 GHz) |
| Radio technologies |
802.11b: Direct-Sequence Spread-Spectrum (DSSS), 802.11a/g/n/ac: Orthogonal Frequency Division Multiplexing (OFDM) |
| Modulation types |
802.11b: BPSK, QPSK, CCK, 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM |
| WLAN |
802.11ac/n: 2×2 Multiple-Input Multiple-Output (MIMO) with 2 spatial streams at 5 GHz, 2×2 MIMO with 2 spatial streams at 2.4 GHz, 20-, 40-, and 80-Mhz channels for 802.11ac, 20 and 40 MHz for 802.11n, PHY data rate up to 867Mbps |
| Data rates supported |
802.11a/b/g: 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps, 802.11n: 6.5 to 300 Mbps, 802.11ac: 6.5 to 867 Mbps |
| Frequency band and operating channels |
A/C Regulatory Domain: 2.412 to 2.462 GHz; 11 channels, 5.180 to 5.240 GHz; 4 channels, 5.745 to 5.825 GHz; 5 channels, E/J Regulatory Domain: 2.412 to 2.472 GHz; 13 channels, 5.180 to 5.240 GHz; 4 channels, K Regulatory Domain: 2.412 to 2.472 GHz; 13 channels, 5.180 to 5.240 GHz; 4 channels, 5.745 to 5.805 GHz; 4 channels |
| Non-overlapping channels |
2.4 GHz: 802.11b/g: 20 MHz: 3, 802.11n: 20 MHz: 3, 5 GHz: 802.11a: 20 MHz: 9, 802.11n: 20 MHz: 9, 40 MHz: 4, 802.11ac: 20 MHz: 9, 40 MHz: 4, 80 MHz: 2 |
| Wireless isolation |
Wireless isolation between clients |
| External antennas |
None |
| Internal antennas |
Internal Fixed Planar Inverted-F Antenna (PIFA) |
| Antenna gain In dBi |
Maximum antenna gain of 4.02 dBi on 2.4 GHz, Maximum antenna gain of 5.63 dBi on 5 GHz |
| Wireless Distribution System (WDS) |
Yes |
| Fast roaming |
Yes |
| Multiple SSIDs |
8 |
| Wireless VLAN map |
Yes |
| WLAN security |
Yes |
| Wi-Fi Multimedia (WMM) |
Yes, with the unscheduled automatic power save |
| Operating Modes |
Access Point mode, WDS Bridging, Workgroup Bridge mode |
| Environmental |
Power options: IEEE 802.3af Ethernet switch, Cisco Power Injector: SB-PWR-INJ2-xx, AC adapter included, 12V/1A, POE peak power: 6.5W |
| Compliance |
Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, Radio approvals: FCC Part 15.247, 15.407, RSS-210 (Canada), EN 300.328, EN 301.893 (Europe), AS/NZS 4268.2003 (Australia and New Zealand), EMI and susceptibility (Class B): FCC Part 15.107 and 15.109, ICES-003 (Canada), EN 301.489-1 and -17 (Europe) |
| Operating temperature |
0° to 40°C (32° to 104°F) |
| Storage temperature |
-20° to 70°C (-4° to 158°F) |
| Operating humidity |
10% to 85% non-condensing |
| Storage humidity |
5% to 90% non-condensing |
| System memory |
256 MB RAM, 128 MB flash |
| Package Contents |
WAP125 Wireless-AC/N Dual Band Desktop Access Point, Power adapter 12V/1A, Quick-start guide, Ethernet network cable |
| Minimum Requirements |
Switch/router with PoE support, PoE injector, or AC power adapter, Web-based configuration: Web browser |
| Warranty |
Access point: Limited lifetime |
